Monthly Archives:November 2016

Maintenance-free Lead – Acid battery for emergency UPS,lighting, power tools

24 Nov 16
ecercom
No Comments

Maintenance-free Lead – Acid battery for emergency UPS,lighting, power tools

 

Thre are usually 2 types battery for UPS battery , AGM and GEL .

AGM batteries indicate Valve Regulated Lead Acid Batteries with the following features: Maintenance-free, no water adding required; sealed valve-regulated, spill proof and leak proof; using unilateralism exhaust (safe vent valve) design on the battery cover, when the battery internal pressure have been up to the specifically value, the safe vent valve will open automatically, and will close after the pressure has been discharged, which can prevent the air to enter into battery.

General Featuress

  1. Silver-coated copper terminals (T1, T2 terminal), brass insert terminals and lead terminals improvethe electric conductivity
  2. Thin plate technology, special grid design, unique paste formula and plate curing process optimize high rate performance
  3. High quality AGM separators with less electrical resistance improve high current discharging properties
  4. ABS material: increase the strength of battery container (Flame-retardant ABS is optional)

Typical Applications

1.UPS (High rate) 2.High power backup supply 3.Emergency power supply
4.Starting system 5.Power tools 6.Emergency lighting 7.Electric starting

Curve Picture

Specifications

Model Nominal Rated Capacity(AH) Approx Dimension Approx
Weight
Terminal type
Voltage 15min (W/cell) 10HR 5HR 1HR Length Width Height Total Height
(V) 1.60 1.80 1.75 1.60 mm in. mm in. mm in. mm in. kg lbs
V/cell V/cell V/cell V/cell
LPX12-2.2 12 7.65 2.2 1.93 1.72 178 7.01 35 1.38 60 2.36 66 2.6 0.96 2.12 T1
LPX12-3.2 12 11.8 3.2 2.91 2.47 134 5.28 67 2.64 60.5 2.38 66.5 2.62 1.35 2.98 T1/T2
LPX12-5.4 12 20.4 5.4 4.85 4.39 90 3.54 70 2.76 101 3.98 107 4.21 1.74 3.84 T1/T2
LPX12-6.0 12 22.3 6 5.4 4.54 151 5.94 65 2.56 93.5 3.19 99 3.9 2.18 4.81 T1/T2
LPX12-6.5 12 25.3 6.5 5.65 4.52 151 5.94 51 2.01 93 3.66 98 3.86 1.9 4.19 T1/T2
LPX12-7.0 12 28.4 7 6.4 5.91 151 5.94 65 2.56 93.5 3.19 99 3.9 2.5 5.51 T1/T2
LPX12-7.6 12 32.2 7.6 6.95 6.28 151 5.94 65 2.56 93.5 3.19 99 3.9 2.45 5.4 T1/T2
LPX12-12 12 49.8 12 10.5 8.77 151 5.94 98 3.86 95 3.74 101 3.98 4.2 9.26 T1/T2
LPX12-17 12 72.5 17 15.7 14.2 181.5 7.15 77 3.03 167.5 6.59 167.5 6.59 5.78 12.7 T3
LPX12-18 12 78.4 18 16.2 14.8 181.5 7.15 77 3.03 167.5 6.59 167.5 6.59 6 13.2 T3/T12
LPX12-20 12 82.7 20 18.5 16.7 181.5 7.15 77 3.03 166.5 6.56 166.5 6.56 6.9 15.2 12V20N(T12)
LPX12-24 12 99.8 24 21.8 19.7 166.5 6.56 175 6.89 125 4.92 125 4.92 8.8 19.4 T3/T12
LPX12-35 12 137.5 33.3 30.7 24.7 195 7.68 130 5.12 164 6.46 180 7.09 10.5 23.2 T10
LPX12-38 12 126.3 36.6 32.8 25.3 197 7.76 165 6.5 170 6.69 170 6.69 13.2 29.1 T6/T10
LPX12-65 12 230.4 65 55 45.2 348 13.7 167 6.57 178 7.01 178 7.01 21.3 47 T6
LPX12-72 12 237.7 72 60 46.4 259 10.2 168 6.61 208 8.19 214 8.43 22.3 49.2 T6/T9
LPX12-100 12 356.1 100 89 78 330 13 173 6.81 212 8.35 220 8.66 30.4 67 T11
LPX12-120 12 483.8 120 107.2 94.6 410 16.1 177 6.97 225 8.86 225 8.86 37.6 82.9 T11
LPX12-150 12 487.5 150 131 101.3 485 19.1 170 6.69 240 9.45 240 9.45 43.5 95.9 T11
LPX12-200 12 675.8 200 173.5 149.6 522 20.6 240 9.45 218 8.58 224 8.82 62.5 137.8 T11
LPX12-250 12 783.3 250.4 217 193.2 522 20.6 268 10.6 220 8.66 226 8.9 73 161 T11
LPX6-100 6 356.1 100 89 78 195 7.68 170 6.69 206.5 8.13 212.5 8.37 15.6 34.4 T6
LPX6-150 6 487.5 150 131 101.3 260 10.2 180 7.09 247 9.72 253 9.96 21.2 46.7 T7
LPX6-200 6 675.8 200 173.5 149.6 322 12.7 178 7.01 228 8.98 234 9.21 30.5 67.3 T11

Automatic 230V / 1.2V / 9V 6F22 LED Discharge AC DC Battery Charger (EU, US, UK, CN, AU)

24 Nov 16
ecercom
No Comments

Automatic 230V / 1.2V / 9V 6F22 LED Discharge AC DC Battery Charger (EU, US, UK, CN, AU)

FEATURE:

1. Suitable for 1-4pcs 1.2V D/C/AA/AAA Ni-MH/Ni-CD battery and 1-2pcs 9V 6F22 batteries.

2. Quick and slow charging selection.

3. With electroscope and discharge function.

4. Four independent charging channels.

5. LED indicator shows the corresponding charging states.

6. Available plug: 50HZ EU, US, UK, CN, AU.

7. With outside AC cable.

SPECIFICATION
1. Input: AC 230V 50HZ

2. Output: C/D/AA/AAA
Fast: 1.2V X4 DC 260mA

Slow: 1.2V X4 DC 130mA

6F22: 16mA

3.Discharge current: 260-380mA

4. Electroscope current: 35-55mA

User’s Guide:
1. Place1.2V Ni-MH/Ni-CD batteries in the charger slots as indicated by the polarity symbols (+/-).

2. Choose Quick or slow for charging.

3. Switch on the electrical source, the corresponding LED indicator light will on.

4. There is a switch on the top of the charger: “CHA” for charge. “TEST” for electroscope and “DISC” for discharge.

5. Switch to “CHA” for charging.

6. Take out the battery when finish charging.

7. It is standard charger, it will not be cut off automatically and the LED color will not change after full charged. So please Calculate the charging time before charging according to the below formulate:
Charging time (H) = 1.3 × battery capacity (mAh)

Charging current (mA)

8. Electroscope function: Only the first slot has electroscope function.Switch to “TEST” to check the 1.5V or 1.2V battery power. Put the battery in the first slot on the left, judge by the brightness of indicator, the lighter indicate more power. (Note: This function can operate whether power connect or not)

9. Discharge function: Four slots have discharge function.Switch to “DISC” , put the Ni-Cd battery in the any slot and start discharge the battery. When the LED turn off means full discharged. (Note: This function can operate whether power connect or not)

36V Electric Bike Lithium Ion Battery Pack 10AH , high capacity

24 Nov 16
ecercom
No Comments

36V Electric Bike Lithium Ion Battery Pack 10AH , high capacity

 

Quick Detail:

 

1)Name:: M36V 10AH Electric bicycle Battery Pack

2)long cycle-life,high capacity

3) Nominal Voltage: 36V

 

TAC M36V 10AH Electric bike Battery Pack / Mn-Li-ion battery for Electric Scooter

 

Quick Detail:

 

Place of Origin: Guangdong China (Mainland)
Brand Name: TAC
Model Name: TAC-EC 1001BA0L
Other Name: M36V 10AH Electric bicycle Battery Pack
Nominal Voltage 36V
Nominal Capacity: 10Ah
Size: Sheel Size:407mm×150mm×67mm (Aluminum shell lenght 330mm)(±10mm)
Weight: 4.441±0.2 Kg

Specification

.1(Capacity):10.0Ah

2(Nominal output Voltage):38.0V

3 (Max. output Voltage): 42.0V

4 (Min. output Voltage): 30.0V

5 (Cell Discharge Protection Voltage): 2.7V±0.1V

6(Cell Overcharge Protection Voltage): 4.25V±0.05V

7 (Charging Voltage): 42.0V

.8 (Charging Current): 1.8A

.9 (Max. Discharge Current):30A

10 (Fuse): 30A

11 (Operating Temperature):

(Discharge Operating) : -20℃~45℃, (Charge Operating): 0℃~40℃

12 (Weight): 4.441±0.2 Kg

Original Iphone 5 Repair Parts Rechargeable Battery 1440mAh

16 Nov 16
ecercom
No Comments
Detailed Product Description

 

Original Iphone 5 Repair Parts Rechargeable Battery 1440mAh

 

Product descriptions:

 

Standard Original quality
Quality control 100% tested ok before delivery
Packing In an antistatic bag with bubble outside carton
Delivery time 2 days after payment confirmation
Warranty 3 month after delivery date

 

Our products:

Voltage: 3.8V; Capacity: 1440mAh
Replacement Built-in 1440mAh Rechargeable Li-ion Battery for iPhone 5
Hight capacity: 1440mAh rechargeable Li-ion battery
Suitable for working with iPhone 5
iPhone 5 replacement parts – battery pack
Spare parts battery for iPhone 5
Payments & Delivery

Payments by T/T bank transfer,  Western Union

Delivery made after 2 days after payment confirmation

Shipping by DHL, Ups, or FedEx

 

Our advantages:

1- We supply best available product quality.

2- Our team members are dedicated to providing prompt service regardless of time difference.

3- We only use international express deliver company: DHL, TNT, FEDEX, UPS. Goods can be

receive in 3-4 days after delivery.

4- We supply most-needed parts: parts of most newly-released models are available.

Our company’s application

OEM GPRS Long Battery Life SMS GPS Tracker For Car Monitoring

16 Nov 16
ecercom
No Comments
Detailed Product Description
Working Voltage: 9~33 V/DC Limiting Voltage: 100V/DC
Power Saving Mode: <20mA DC 12V Backup Battery: Working Time 3h
Canning Material: Aluminum Alloy Main Device Weight: 0.26kgnet Weight

OEM GPRS Long Battery Life SMS GPS Tracker For Car Monitoring

 

 

GPS device with broad expansion ports has the features like multiple image monitoring, TTS voice repot, automatic report station, driving record (black box), LED screen to release Ads info, electronic lead sealing, temperature detecting, fuel consumption detecting, loaded detecting, operating data uploading and others.

 

 

Main Features:

 

● Based international newest chip, double core structure, powerful

● GPRS and SMS double channels, TCP and UDP double working mode

● Positioning based GPS reflected wave, assist with base station, strong capacity to prevent blocking to reduce the blind area

●Three proofing design, Quadruple protection for power source, 4 levels watchdog

● Low power consumption,

● Build-in high capacity backup battery.

● Broad intelligence interface to achieve automatic report station for bus, LED screen to release Ads

● Build-in TTS voice module to achieve the function of voice report.

● It can update remotely, easy to maintain

● Approved by 3C, and approved by national grade quality authentication.

 

 

 Product Functions:

 

1.Signal detecting and control: 13 routes signal sensor, 17 vehicle status detecting, intelligence mode and forced mode to cut fuel/circuit, user-defined backup output control.

2.   Alarm: 19 alarms, 3 modes of alarm.

3.   Monitoring: vehicleautomatic tracking/monitoring, regions setting, geo-fence, GPS mileage statistics, blind area supplementary report, traces storage, base station positioning.

4.   Road detecting: road detecting, road detecting calculation, departure alarm, speeding alarm, entry/exit station report…

5.   Voice and phone call: hands free phone, remote listen in, voice reminding device, TTS voice report.

6.  Fuel consumption detecting: build-in 2 routes AD input interface, equipped floater attenuation cable can measure fuel consumption, and equipped temperature can detect the temperature.

7.   LED screen for release Ads info:Downlink Ads to screen via RS232 port and show Ads on the screen.

8.  Image: monitor by image, store/record image, image transmission.

9.   Remote update: main device’s program was support to remote download; user can renew the program remotely.

10. Protection:

Power saving mode: in this mode, GPS device’s working current will drop to20mA@12V when vehicle was in flameout.

Car battery over discharge protection: it will switch to supply power by backup battery if car battery’s voltage is very low (9.5V).

Over voltage protection: it will cut the external circuit to protect GPS device if the voltage exceeds limit value (36V), backup battery can work for 3h.

 

Fashion Outside Climbing Mobile Portable Power Bank Metal Tube Batter Case

16 Nov 16
ecercom
No Comments
Application: IPhone, IPad, IPod, Samsung, HTC, Sony Etc. Product Size: 105*22*22mm
Capacity: 2600mAh Certification: CE/ROHS/FCC
Battery Level: A N.W.: 80g
Protection: SCP, OVP, OCP, ODP Battery Type: 18650 Li-ion Battery

Fashion Outside Climbing Mobile Portable Power Bank Metal Tube Batter Case

Features:

  1. The design of lightweight, small, convenient to carry.
  2. Power bank for mobile phones,MP3, MP4 or other digital products.
  3. Digital power specially designed for all cellphones to avoid over-charging or damaging your phone.
  4. Integrated smart chip provides full protection against electric overload.
  5. Steady high-current output ensures charging efficiency and safety.

Specifications:

 

Compatible Models All devices with USB charging cable
Battery Type Li-ion battery
Nominal Capacity 2600mAh
Battery Actual Capacity 2600mAh
Capacity Range 2600mAh
Input Voltage DC 5.0V
Output Current 1A
Output Voltage DC 5.0V
Charge time 5-6 hours
Working temperature -10–55 degree
Circle times >500 times
Plug and play yes
Color many different colors avaliable
Safety protection over-current, over-heat and over-voltage

 

Competitive Advantage:

 

1. Experienced technical staff

2. New and advanced machines

3. High quality control team

4. Professional design team to make best designs for customers

5. Good after-sell service

AC220V – 240V to DC12V 30A Automatic Intelligent 3 Stage Car Battery Charger for lead Acid Battery

16 Nov 16
ecercom
No Comments
Detailed Product Description
Input Voltage Range: AC220V-240V Output Voltage: DC12V
Charger Current: 20A Application: Car Battery, Solar Battery, Home
Function: Automatic Intelligent Three-Stage Cahrge Weight: 0.6KG

 

AC220V-240V to DC12V 30A Automatic Intelligent Three-Stage Car Battery Charger for lead Acid Battery

 

The TANYANO series lead-acid battery charger is professional design according to the power battery of electric vehicles equipment. It uses the advanced soft switch technology, with small size, high conversion efficiency, running full loading for a long time, stable output current, high reliability, long service life, easy operation,etc. With short-circuited protection, low-voltage protection, over-heated protection. The long delay digital counter can ensure the battery from the constant voltage to the float charge reliably every time.

Three-phase charging mode

Step one >> Constant current mode:When the voltage of the battery is lower than the value set by the charger,the charger will work under the constant current mode and supply the constant current for the battery.

Step two >>
Constant voltage mode:Using the pulse width modulation(PWM) tech to control the charging current and output voltage of the charger which ensures the battery is fully charged and avoids over charging.

Step three>>
Floating charge mode:When the voltage of the battery is approaching the value of the constant voltage mode,and the current will cut down to the given current gradually,that means the battery power is full,then the pilot lamp will turn green and the fan will stop working.The charger will turn the mode into floating charmode automatically.At this moment,the battery can be stopped charging or keep on floating charge for half an hour.

Long operating time TAC 24V10Ah Electric Bike Battery Pack for Electric Scooter

15 Nov 16
ecercom
No Comments
Detailed Product Description

Long operating time TAC 24V10Ah Electric Bike Battery Pack for Electric Scooter

Quick Detail:

Place of Origin: Guangdong China (Mainland)
Brand Name: TAC
Model Name: M24V 10AH Li-Mn-ion Battery
Other Name: M24V 10AH Electric bicycle Battery Pack
Nominal Voltage 24V
Nominal Capacity: 10Ah
Size: 157.5mm×70mm×46mm(±2mm)
Weight: 2.90±0.1 Kg

Specification
.1(Capacity):10Ah
.2(Nominal output Voltage):26.6V
.3 (Max. output Voltage): 29.4V
4 (Min. output Voltage): 21V
.5 (Cell Over Discharge Protection Voltage): 2.70V±0.02V
6 (Cell Overcharge Protection Voltage): 4.25V±0.025V
.7 (Charging Voltage): 29.40V
8 (Charging Current): 2.0±0.2A
9 (Max.Discharge Current): 20A
.10 (Fuse): 30A
.11 (Operating Temperature):
(Discharge Operating) : -20℃~45℃, (Charge Operating):  0℃~40℃
.12 (Weight): 2.90±0.1 Kg

Feature
1. High energy density
2. High open circuit voltage
3. Wide range of operating temperature
4. Stable operating voltage and current
5. Long operating time
6. Low self-discharge rate (less than 2% per year at 20°C).

Main Applications :
1Electric bicycle
2Electric Scooter

Original Launch BST-760 Battery System Tester

15 Nov 16
ecercom
No Comments
Detailed Product Description
Supported Language: English, Spanish, German, French And Italian, Etc.
Original LAUNCH BST-760 Battery System Tester-EA
It is Simple, secure , fast , and accurate display test results ( the test takes about 3 seconds)
Original LAUNCH BST-760 Battery System Tester-EA
Why buy BST-760 Tester from us ?

1. Supported Language: English, Spanish, German, French and Italian, etc.
2. Product Principle: The world’s most advanced conductance test technology
3. Scope: Suitable for 6V & 12V battery system and 12V & 24V starting and charging system detects.Apply to the European and American countries
Main Parameters:
1 Shell ABS anti-acid plastic , soft rubber TPU corrosion-resistant package,two-color molding
2 128 * 64 dot matrix , large backlit display screen (3 inches ) adjustable brightness LCD display
3 The configuration of the 0-900A AC and DC current clamp
4 Built-in thermal printer , the test results can be printed out at any time
5 Can store 100 groups of test results data , ready at any time to view and print any of a group of test data
6 Test standards , including the most commonly used battery standard,such as CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB
7 Operating Temperature: -20-60 ℃ (-4-140 ℉)
Product Advantage
  1. Eight lines with backlight LCD display and humane language prompted interface
  2. Does not emit light , no heat , no discharge , no spark , no operating dangerous
  3. Configuration 0-900A AC and DC current clamp
  4. Built – in thermal printer
  5. Can store 100 groups of test results
  6. Automatic temperature compensation function
  7. With ripple voltage test function
  8. Powerful auxiliary functions
  9. Multi- language menu display
  10. Replaceable test lines
  11. Dedicated Kelvin test clip
Advanced Functionality
  1. Applicable to a variety of models, all kinds of batteries , and a variety of system mode
  2. Directly detected in the car , do not need to remove the battery
  3. Directly test the battery of the loss of electricity , bad cell battery
  4. Testable starting / charging current
Powerful Auxiliary Functions
  1. View / Print
  2. Ammeter Function
  3. Thermometer
  4. QC mode
  5. License plate number input function
  6. Time and time format Adjustment
  7. User information input
  8. Display backlight brightness adjustment function
  9. Print sharpness adjustment
  10. Standby power function
Test Criteria and Scope
CCA 100-2000 (SAE & BCI to develop the standard most commonly used : the cold-start battery rating )
BCI 100-2000 ( international battery Committee standards )
CA 100-2000 (0 ℃ when the effective starting current rating)
MCA 100-2000 ( ships standard effective starting current rating , 0 ℃ )
JIS 26A17 – 245H52 ( Japanese Industrial Standard)
Standard DIN 100-1400 ( German Automobile Industry Committee )
The IEC 100-1400 ( International Electrotechnical Commission standard )
EN 100-2000 ( European Automobile Manufacturers Association standards )
SAE 100-2000 ( U.S. Engineers Standard)
GB 100-1400 ( Chinese National Standard )
Function:
760 has 2 battery:one is used on the host, it can be tested without battery but have not backup power supply function.the other battery is used on current clamp.
The backup power supply function is the 15th auxiliary function. Some luxury vehicle ECU Power can’t be cut.If the power failure,it will be locked. So when change storage-battery for luxury vehicle,760 can supply power to ECU.