Daily Archives:November 24, 2016

Maintenance-free Lead – Acid battery for emergency UPS,lighting, power tools

24 Nov 16
ecercom
No Comments

Maintenance-free Lead – Acid battery for emergency UPS,lighting, power tools

 

Thre are usually 2 types battery for UPS battery , AGM and GEL .

AGM batteries indicate Valve Regulated Lead Acid Batteries with the following features: Maintenance-free, no water adding required; sealed valve-regulated, spill proof and leak proof; using unilateralism exhaust (safe vent valve) design on the battery cover, when the battery internal pressure have been up to the specifically value, the safe vent valve will open automatically, and will close after the pressure has been discharged, which can prevent the air to enter into battery.

General Featuress

  1. Silver-coated copper terminals (T1, T2 terminal), brass insert terminals and lead terminals improvethe electric conductivity
  2. Thin plate technology, special grid design, unique paste formula and plate curing process optimize high rate performance
  3. High quality AGM separators with less electrical resistance improve high current discharging properties
  4. ABS material: increase the strength of battery container (Flame-retardant ABS is optional)

Typical Applications

1.UPS (High rate) 2.High power backup supply 3.Emergency power supply
4.Starting system 5.Power tools 6.Emergency lighting 7.Electric starting

Curve Picture

Specifications

Model Nominal Rated Capacity(AH) Approx Dimension Approx
Weight
Terminal type
Voltage 15min (W/cell) 10HR 5HR 1HR Length Width Height Total Height
(V) 1.60 1.80 1.75 1.60 mm in. mm in. mm in. mm in. kg lbs
V/cell V/cell V/cell V/cell
LPX12-2.2 12 7.65 2.2 1.93 1.72 178 7.01 35 1.38 60 2.36 66 2.6 0.96 2.12 T1
LPX12-3.2 12 11.8 3.2 2.91 2.47 134 5.28 67 2.64 60.5 2.38 66.5 2.62 1.35 2.98 T1/T2
LPX12-5.4 12 20.4 5.4 4.85 4.39 90 3.54 70 2.76 101 3.98 107 4.21 1.74 3.84 T1/T2
LPX12-6.0 12 22.3 6 5.4 4.54 151 5.94 65 2.56 93.5 3.19 99 3.9 2.18 4.81 T1/T2
LPX12-6.5 12 25.3 6.5 5.65 4.52 151 5.94 51 2.01 93 3.66 98 3.86 1.9 4.19 T1/T2
LPX12-7.0 12 28.4 7 6.4 5.91 151 5.94 65 2.56 93.5 3.19 99 3.9 2.5 5.51 T1/T2
LPX12-7.6 12 32.2 7.6 6.95 6.28 151 5.94 65 2.56 93.5 3.19 99 3.9 2.45 5.4 T1/T2
LPX12-12 12 49.8 12 10.5 8.77 151 5.94 98 3.86 95 3.74 101 3.98 4.2 9.26 T1/T2
LPX12-17 12 72.5 17 15.7 14.2 181.5 7.15 77 3.03 167.5 6.59 167.5 6.59 5.78 12.7 T3
LPX12-18 12 78.4 18 16.2 14.8 181.5 7.15 77 3.03 167.5 6.59 167.5 6.59 6 13.2 T3/T12
LPX12-20 12 82.7 20 18.5 16.7 181.5 7.15 77 3.03 166.5 6.56 166.5 6.56 6.9 15.2 12V20N(T12)
LPX12-24 12 99.8 24 21.8 19.7 166.5 6.56 175 6.89 125 4.92 125 4.92 8.8 19.4 T3/T12
LPX12-35 12 137.5 33.3 30.7 24.7 195 7.68 130 5.12 164 6.46 180 7.09 10.5 23.2 T10
LPX12-38 12 126.3 36.6 32.8 25.3 197 7.76 165 6.5 170 6.69 170 6.69 13.2 29.1 T6/T10
LPX12-65 12 230.4 65 55 45.2 348 13.7 167 6.57 178 7.01 178 7.01 21.3 47 T6
LPX12-72 12 237.7 72 60 46.4 259 10.2 168 6.61 208 8.19 214 8.43 22.3 49.2 T6/T9
LPX12-100 12 356.1 100 89 78 330 13 173 6.81 212 8.35 220 8.66 30.4 67 T11
LPX12-120 12 483.8 120 107.2 94.6 410 16.1 177 6.97 225 8.86 225 8.86 37.6 82.9 T11
LPX12-150 12 487.5 150 131 101.3 485 19.1 170 6.69 240 9.45 240 9.45 43.5 95.9 T11
LPX12-200 12 675.8 200 173.5 149.6 522 20.6 240 9.45 218 8.58 224 8.82 62.5 137.8 T11
LPX12-250 12 783.3 250.4 217 193.2 522 20.6 268 10.6 220 8.66 226 8.9 73 161 T11
LPX6-100 6 356.1 100 89 78 195 7.68 170 6.69 206.5 8.13 212.5 8.37 15.6 34.4 T6
LPX6-150 6 487.5 150 131 101.3 260 10.2 180 7.09 247 9.72 253 9.96 21.2 46.7 T7
LPX6-200 6 675.8 200 173.5 149.6 322 12.7 178 7.01 228 8.98 234 9.21 30.5 67.3 T11

Automatic 230V / 1.2V / 9V 6F22 LED Discharge AC DC Battery Charger (EU, US, UK, CN, AU)

24 Nov 16
ecercom
No Comments

Automatic 230V / 1.2V / 9V 6F22 LED Discharge AC DC Battery Charger (EU, US, UK, CN, AU)

FEATURE:

1. Suitable for 1-4pcs 1.2V D/C/AA/AAA Ni-MH/Ni-CD battery and 1-2pcs 9V 6F22 batteries.

2. Quick and slow charging selection.

3. With electroscope and discharge function.

4. Four independent charging channels.

5. LED indicator shows the corresponding charging states.

6. Available plug: 50HZ EU, US, UK, CN, AU.

7. With outside AC cable.

SPECIFICATION
1. Input: AC 230V 50HZ

2. Output: C/D/AA/AAA
Fast: 1.2V X4 DC 260mA

Slow: 1.2V X4 DC 130mA

6F22: 16mA

3.Discharge current: 260-380mA

4. Electroscope current: 35-55mA

User’s Guide:
1. Place1.2V Ni-MH/Ni-CD batteries in the charger slots as indicated by the polarity symbols (+/-).

2. Choose Quick or slow for charging.

3. Switch on the electrical source, the corresponding LED indicator light will on.

4. There is a switch on the top of the charger: “CHA” for charge. “TEST” for electroscope and “DISC” for discharge.

5. Switch to “CHA” for charging.

6. Take out the battery when finish charging.

7. It is standard charger, it will not be cut off automatically and the LED color will not change after full charged. So please Calculate the charging time before charging according to the below formulate:
Charging time (H) = 1.3 × battery capacity (mAh)

Charging current (mA)

8. Electroscope function: Only the first slot has electroscope function.Switch to “TEST” to check the 1.5V or 1.2V battery power. Put the battery in the first slot on the left, judge by the brightness of indicator, the lighter indicate more power. (Note: This function can operate whether power connect or not)

9. Discharge function: Four slots have discharge function.Switch to “DISC” , put the Ni-Cd battery in the any slot and start discharge the battery. When the LED turn off means full discharged. (Note: This function can operate whether power connect or not)

36V Electric Bike Lithium Ion Battery Pack 10AH , high capacity

24 Nov 16
ecercom
No Comments

36V Electric Bike Lithium Ion Battery Pack 10AH , high capacity

 

Quick Detail:

 

1)Name:: M36V 10AH Electric bicycle Battery Pack

2)long cycle-life,high capacity

3) Nominal Voltage: 36V

 

TAC M36V 10AH Electric bike Battery Pack / Mn-Li-ion battery for Electric Scooter

 

Quick Detail:

 

Place of Origin: Guangdong China (Mainland)
Brand Name: TAC
Model Name: TAC-EC 1001BA0L
Other Name: M36V 10AH Electric bicycle Battery Pack
Nominal Voltage 36V
Nominal Capacity: 10Ah
Size: Sheel Size:407mm×150mm×67mm (Aluminum shell lenght 330mm)(±10mm)
Weight: 4.441±0.2 Kg

Specification

.1(Capacity):10.0Ah

2(Nominal output Voltage):38.0V

3 (Max. output Voltage): 42.0V

4 (Min. output Voltage): 30.0V

5 (Cell Discharge Protection Voltage): 2.7V±0.1V

6(Cell Overcharge Protection Voltage): 4.25V±0.05V

7 (Charging Voltage): 42.0V

.8 (Charging Current): 1.8A

.9 (Max. Discharge Current):30A

10 (Fuse): 30A

11 (Operating Temperature):

(Discharge Operating) : -20℃~45℃, (Charge Operating): 0℃~40℃

12 (Weight): 4.441±0.2 Kg